Nodal Ninja Tripod Adapter for Pole Series 1/2 Type B
Next batch will ship August 25 (estimated).
Order now to reserve, limited availability.
This Nodal Ninja tripod adapter (Type B) works with tripods that have a top disk with 3/8” thread, and a center column with diameter of 32mm, 28mm, 26mm or 25mm. Tripod with 26mm center column is only recommended for application below 3m. For application above 3m, tripod with 28mm center column or bigger is recommended. The adapter spreads the bending torque over the length of center column, greatly reducing the torque at the tripod top disk, rotator and pole base. This adapter will also work with Manfrotto tri-facet center column.
When the height of the Fanotec pole increases beyond 3 meters, the need for an effective support base becomes very important. Some professional pole systems on the market come with a dedicated support tripod, which is bulky, costly and cannot be used for other purposes. High end tripods for photography are strong enough to support a 6m pole.
Some people attempt to install a rotator and pole directly onto the tripod. This is very dangerous. Rotators and tripod center columns are designed to withstand vertical loading with minimal bending torque. With a long pole, the torque is increased 15 times. This can cause damage, without noticeable warning, to the tripod center column top disk, rotator and pole base and to the gears on top of the pole. Damage to equipment and potential injury to people in the area should be avoided at all costs. As part of the pole systems, this is a low cost, light weight and safe to use tripod adapter for use with Nodal Ninja rotators and poles.
Compatible with Pole Rotators and Nodal Ninja Advanced Rotators.
To be used with Pole Series 1 or 2.
This is a second generation Type B adapter. We also offer a slightly cheaper Type A adapter which is not as compatible with tripods due to the need of screwing to the bottom of central column. The Type B is can be used with more tripod types.
Upper: Hole Diameter 43.5mm, Center to Center Distance 75mm
Lower: Hole Diameter 32mm, Center to Center Distance 75mm