Přeskočit na obsah
Using Nadir Adapters with Nodal Ninja Mecha

Using Nadir Adapters with Nodal Ninja Mecha

Nadir adapters allow easy capture of the "nadir" in a spherical panorama which is a spot directly below the point of view usually obstructed by your tripod.

Nadir adapters are sophisticated but easy to use pieces of equipment with a turning mechanism that allows you to position your camera facing down along a side of your tripod. Then simply move your tripod slightly so the lens is pointed directly over the original point of view and you will have an unobstructed view of the nadir. This is much better than taking the down shot from a side because when you use a nadir adapter the reflections of the floor remain the same for the down shot. This is especially required when there is a complicated ground such as stairs or see-through glass, etc. On top of all that the nadir adapter allows you to take the down shot much quicker and it will also save time on a computer as the result will be easier to stitch.

The great news is that the Nodal Ninja 6 Mecha P1 C2, the Nodal Ninja Mecha E2 C2 and the Nodal Ninja 3 MK3 E1 C2 Mecha already come with a nadir adapter preinstalled.

If you are looking for a nadir adapter for the Nodal Ninja 3 MKII Mecha, it is to be purchased separately, and you can find it here.

Předchozí článek The Nodal Ninja Phone Holder is Ready For Ordering
Další článek Behold The New Nodal Ninja Ultimate Phone Holder

Zanechat komentář

Než se komentáře objeví, musí být schváleny

* Požadovaná pole

Porovnejte produkty

{"one"=>"Vyberte 2 nebo 3 položky k porovnání", "other"=>"{{ count }} ze 3 vybraných položek"}

Vyberte první položku k porovnání

Vyberte druhou položku pro porovnání

Vyberte třetí položku k porovnání