NEW IN STOCK: Nodal Ninja Phone Holder for Smarphone Panoramic Photography

The Ultimate Map of All Nodal Ninja Lens Ring Stop Plates
Last updated December 2021
Nodal Ninja stop plates are designed to auto-calibrate the no-parallax point on your R1/R10/R20 head for your specific lens ring and workflow. Without these plastic stop plates you need to check if the shift in the panorama head clamp is correct to ensure a good no-parallax point calibration. The stop plates are designed to eliminate the need for this check. After you insert them to the bottom of the lens ring they auto-calibrate the no-parallax point on your Nodal Ninja R1, R10 and R20 heads. It works because there is a small hole in each of the plates that holds the security pin on your head.
The stop plates come in a variety of shapes and sizes, here are some illustrative examples:
Here is a complete listing of all available Nodal Ninja stop plates:
SKU | # | In | Intended for | Tilt | Shots per 360 |
F2106 | - | Any | Any lens ring that has space for this stop on the lens ring plate |
YOUR CHOICE |
YOU DECIDE |
201 | R20* |
Sigma 8mm
Canon V2 (F6401) |
7.5 deg. | 4 | |
|
202 | R20* | Sigma 8mm Nikon V2 (F6402) |
7.5 deg. | 4 |
F6353 | 203 | R20* | Canon 8-15mm V2 (F6403) |
7.5 deg. | 4 |
F6319 | 104 | R10* |
Sigma 8mm Canon V2 (F6401) |
7.5 deg. | 4 |
F6319B | 104B | R10** |
Sigma 8mm Canon V2 (F6401) |
7.5 deg. | 4 |
F6316 | 105 | R10* |
Sigma 8mm Nikon V2 (F6402) |
7.5 deg. | 4 |
F6322 | 106 | R10* |
Canon 8-15mm V2 (F6403) |
7.5 deg. | 4 |
F6310 | 001 | R1 |
Sigma 8mm Canon V1 |
0 / 5 deg. | 4 |
F6317 | 101 | R10 |
Sigma 8mm Nikon V1 |
7.5 deg. | 4 |
F6320 (sold out) |
102 | R10 |
Sigma 8mm Canon V1 |
7.5 deg. | 4 |
F6323 | 103 | R10 |
Canon 8-15mm V1 |
7.5 deg. | 4 |
F6325 (sold out] |
- | ANY | Any lens ring with LRP35 plate |
YOUR CHOICE |
YOU DECIDE |
F6327 | - | R1/R10/R20 | Any lens ring with LRP40 plate |
YOUR CHOICE |
YOU DECIDE |
F6328 | - | R1/R10/R20 |
Any lens ring with LRP45 plate |
YOUR CHOICE |
YOU DECIDE |
F6331 | - | R1/R10/R20 |
Any lens ring with LRP45X plate |
YOUR CHOICE |
YOU DECIDE |
F6334 | - | R1/R10/R20 |
Any lens ring with LRP50 plate |
YOUR CHOICE |
YOU DECIDE |
* Note - Google packages: that these rail stops are already included for free when you purchase a Google package from us. You will only need it when you are buying a separate lens ring or if you have upgraded or changed your equipment.
** 104B - Intended for the R10 head with a custom 30mm top clamp.
Note - Compatibility: The above stop plates are compatible with Nodal Ninja R1, R10 or R20 heads which have a security pin that can snap into the hole in the stop plate.
Einen Kommentar hinterlassen