The Ultimate Map of All Nodal Ninja Tripod Adapters for Poles

Nodal Ninja tripod adapters are designed to keep your pole attached to the tripod. They are compatible with Pole Rotators and Nodal Ninja Advanced Rotators and can be used with all poles including the Travel Pole, Pole Series 1 or 2 or 3.

DiaL = Max Tripod Center Column Diameter (on lower part Type B)
Dia = Max Pole Diameter (on upper part)
D = Center to Center Distance

* if you find a mistake please let us know 

Upper and Lower Parts

Each tripod adapter has a lower part and upper part. You will need both parts for the tripod adapter to work properly. Poles need two joint points and the adapter spreads the bending torque over the length of the distance between upper and lower parts, greatly reducing the torque at the tripod top disk, rotator and pole base.

Type A or B

Type A requires a 3/8" stud screw at the bottom of tripod's central column. The Type B is can be used with more tripod types because it clamps onto the central column. Multiple plastic fittings are provided in the package for free with Type B adapters to accommodate various tripod center column widths. On the other hand if your tripod's central column is not supported, you won't be able to use Type B.

Center to Center Distance: Travel Pole (60mm), Normal (75mm) or Long (105mm)

Most of the tripod adapters offered are "Normal" size that fits most tripods. We also offer specialized custom Type Long adapters for tripods with big top plates to support pole to tripod central column distance of 105mm.