The Ultimate Map of All Nodal Ninja Tripod Adapters for Poles

Nodal Ninja tripod adapters are designed to keep your pole attached to the tripod. They are compatible with Pole Rotators and Nodal Ninja Advanced Rotators and can be used with all poles including the Travel Pole, Pole Series 1 or 2 or 3.

Tripod Adapter for the Travel Pole

F7306 - Tripod Adapter for Travel Pole Type B (this is the only tripod adapter available for the Travel Pole)

Tripod Adapter for the Pole Series 1 and 2 

Most customers buy the Type B (F7316).

Tripod = Max Tripod Center Column Diameter (on lower part Type B)
Dia = Max Pole Diameter (on upper part)
D = Center to Center Distance
L = New version of tripod adapter introduced November 2021, compatible with L brackets for horizontal application of Nodal Ninja poles, backwards compatible

Tripod Adapter for the Pole Series 3

Most customers buy the Type A Long (F7325)

Tripod = Max Tripod Center Column Diameter (on lower part Type B)
Dia = Max Pole Diameter (on upper part)
D = Center to Center Distance

* if you find a mistake please let us know 

Upper and Lower Parts

Each tripod adapter has a lower part and upper part. You will need both parts for the tripod adapter to work properly. Poles need two joint points and the adapter spreads the bending torque over the length of the distance between upper and lower parts, greatly reducing the torque at the tripod top disk, rotator and pole base.

Type A

Type A requires a 3/8" stud screw at the bottom of tripod's central column.

Type B

The Type B is can be used with more tripod types because it clamps onto the central column. Multiple plastic fittings are provided in the package for free with Type B adapters to accommodate various tripod center column widths. On the other hand if your tripod's central column is not supported, you won't be able to use Type B.

Type B 32mm: This tripod adapter works with tripods that have a top disk with 3/8” thread, and a center column with a diameter of 32mm, 28mm, 26mm or 25mm. This adapter is more expensive and supports few sizes of the center column. Tripod with 25mm or 26mm center column is only recommended for application below 3m. For application above 3m, tripod with a 28mm center column or bigger is recommended. The adapter spreads the bending torque over the length of the center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator, and Fanotec poles.

Type B 37mm: This tripod adapter works with rare tripods that have a top disk with 3/8” thread, and a center column with a diameter of 37. No other column sizes are supported. The adapter spreads the bending torque over the length of the center column, greatly reducing the torque at the tripod top disk, rotator and pole base. It works with Fanotec advanced rotators, pole rotator, and Fanotec poles.

Center to Center Distance: Travel Pole (60mm), Normal (75mm) or Long (105mm)

Most of the tripod adapters offered are "Normal" size that fits most tripods. We also offer specialized custom Type Long adapters for tripods with big top plates to support pole to tripod central column distance of 105mm.