The Ultimate Map of All Nodal Ninja Lens Ring Stop Plates
Last updated December 2021
Nodal Ninja stop plates are designed to auto-calibrate the no-parallax point on your R1/R10/R20 head for your specific lens ring and workflow. Without these plastic stop plates you need to check if the shift in the panorama head clamp is correct to ensure a good no-parallax point calibration. The stop plates are designed to eliminate the need for this check. After you insert them to the bottom of the lens ring they auto-calibrate the no-parallax point on your Nodal Ninja R1, R10 and R20 heads. It works because there is a small hole in each of the plates that holds the security pin on your head.
The stop plates come in a variety of shapes and sizes, here are some illustrative examples:
Here is a complete listing of all available Nodal Ninja stop plates:
SKU | # | In | Intended for | Tilt | Shots per 360 |
F2106 | - | Any | Any lens ring that has space for this stop on the lens ring plate |
YOUR CHOICE |
YOU DECIDE |
201 | R20* |
Sigma 8mm
Canon V2 (F6401) |
7.5 deg. | 4 | |
|
202 | R20* | Sigma 8mm Nikon V2 (F6402) |
7.5 deg. | 4 |
F6353 | 203 | R20* | Canon 8-15mm V2 (F6403) |
7.5 deg. | 4 |
F6319 | 104 | R10* |
Sigma 8mm Canon V2 (F6401) |
7.5 deg. | 4 |
F6319B | 104B | R10** |
Sigma 8mm Canon V2 (F6401) |
7.5 deg. | 4 |
F6316 | 105 | R10* |
Sigma 8mm Nikon V2 (F6402) |
7.5 deg. | 4 |
F6322 | 106 | R10* |
Canon 8-15mm V2 (F6403) |
7.5 deg. | 4 |
F6310 | 001 | R1 |
Sigma 8mm Canon V1 |
0 / 5 deg. | 4 |
F6317 | 101 | R10 |
Sigma 8mm Nikon V1 |
7.5 deg. | 4 |
F6320 (sold out) |
102 | R10 |
Sigma 8mm Canon V1 |
7.5 deg. | 4 |
F6323 | 103 | R10 |
Canon 8-15mm V1 |
7.5 deg. | 4 |
F6325 (sold out] |
- | ANY | Any lens ring with LRP35 plate |
YOUR CHOICE |
YOU DECIDE |
F6327 | - | R1/R10/R20 | Any lens ring with LRP40 plate |
YOUR CHOICE |
YOU DECIDE |
F6328 | - | R1/R10/R20 |
Any lens ring with LRP45 plate |
YOUR CHOICE |
YOU DECIDE |
F6331 | - | R1/R10/R20 |
Any lens ring with LRP45X plate |
YOUR CHOICE |
YOU DECIDE |
F6334 | - | R1/R10/R20 |
Any lens ring with LRP50 plate |
YOUR CHOICE |
YOU DECIDE |
* Note - Google packages: that these rail stops are already included for free when you purchase a Google package from us. You will only need it when you are buying a separate lens ring or if you have upgraded or changed your equipment.
** 104B - Intended for the R10 head with a custom 30mm top clamp.
Note - Compatibility: The above stop plates are compatible with Nodal Ninja R1, R10 or R20 heads which have a security pin that can snap into the hole in the stop plate.
Laisser un commentaire